CONTRIBUTED RESEARCH ARTICLES 144 ggmap: Spatial Visualization with ggplot2

In spatial statistics the ability to visualize data and models superimposed with their basic social landmarks and geographic context is invaluable. ggmap is a new tool which enables such visualization by combining the spatial information of static maps from Google Maps, OpenStreetMap, Stamen Maps or CloudMade Maps with the layered grammar of graphics implementation of ggplot2. In addition, several new utility functions are introduced which allow the user to access the Google Geocoding, Distance Matrix, and Directions APIs. The result is an easy, consistent and modular framework for spatial graphics with several convenient tools for spatial data analysis. Introduction Visualizing spatial data in R can be a challenging task. Fortunately the task is made a good deal easier by the data structures and plot methods of sp, RgoogleMaps, and related packages (Pebesma and Bivand, 2006; Bivand et al., 2008; Loecher and Berlin School of Economics and Law, 2013). Using those methods, one can plot the basic geographic information of (for instance) a shape file containing polygons for areal data or points for point referenced data. However, compared to specialized geographic information systems (GISs) such as ESRI’s ArcGIS, which can plot points, polygons, etc. on top of maps and satellite imagery with drag-down menus, these visualizations can be pretty disappointing. This article details some new methods for the visualization of spatial data in R using the layered grammar of graphics implementation of ggplot2 in conjunction with the contextual information of static maps from Google Maps, OpenStreetMap, Stamen Maps or CloudMade Maps (Wickham, 2009, 2010). The result is an easy to use R package named ggmap. After describing the nuts and bolts of ggmap, we showcase some of its capabilities in a simple case study concerning violent crimes in downtown Houston, Texas and present an overview of a few utility functions. Plotting spatial data in R Areal data is data which corresponds to geographical extents with polygonal boundaries. A typical example is the number of residents per zip code. Considering only the boundaries of the areal units, we are used to seeing areal plots in R which resemble those in Figure 1 (left). -96.0 -95.5 -95.0 -94.5 29 .0 29 .5 30 .0 30 .5 longitude la tit ud e -96.0 -95.5 -95.0 -94.5 29 .0 29 .5 30 .0 30 .5 longitude la tit ud e Figure 1: A typical R areal plot – zip codes in the Greater Houston area (left), and a typical R spatial scatterplot – murders in Houston from January 2010 to August 2010 (right). While these kinds of plots are useful, they are not as informative as we would like in many situations. For instance, when plotting zip codes it is helpful to also see major roads and other landmarks which form the boundaries of areal units. The situation for point referenced spatial data is often much worse. Since we can’t easily contextualize a scatterplot of points without any background information at all, it is common to add points as The R Journal Vol. 5/1, June 2013 ISSN 2073-4859 CONTRIBUTED RESEARCH ARTICLES 145 an overlay of some areal data—whatever areal data is available. The resulting plot looks like Figure 1 (right). In most cases the plot is understandable to the researcher who has worked on the problem for some time but is of hardly any use to his audience, who must work to associate the data of interest with their location. Moreover, it leaves out many practical details—are most of the events to the east or west of landmark x? Are they clustered around more well-to-do parts of town, or do they tend to occur in disadvantaged areas? Questions like these can’t really be answered using these kinds of graphics because we don’t think in terms of small scale areal boundaries (e.g. zip codes or census tracts). With a little effort better plots can be made, and tools such as maps, maptools, sp, or RgoogleMaps make the process much easier; in fact, RgoogleMaps was the inspiration for ggmap (Becker et al., 2013; Bivand and Lewin-Koh, 2013). Moreover, there has recently been a deluge of interest in the subject of mapmaking in R—Ian Fellows’ excellent interactive GUI-driven DeducerSpatial package based on Bing Maps comes to mind (Fellows et al., 2013). ggmap takes another step in this direction by situating the contextual information of various kinds of static maps in the ggplot2 plotting framework. The result is an easy, consistent way of specifying plots which are readily interpretable by both expert and audience and safeguarded from graphical inconsistencies by the layered grammar of graphics framework. The result is a spatial plot resembling Figure 2. Note that map images and information in this work may appear slightly different due to map provider changes over time. murder <subset(crime, offense == "murder") qmplot(lon, lat, data = murder, colour = I('red'), size = I(3), darken = .3)


Introduction
Visualizing spatial data in R can be a challenging task.Fortunately the task is made a good deal easier by the data structures and plot methods of sp, RgoogleMaps, and related packages (Pebesma and Bivand, 2006;Bivand et al., 2008;Loecher and Berlin School of Economics and Law, 2013).Using those methods, one can plot the basic geographic information of (for instance) a shape file containing polygons for areal data or points for point referenced data.However, compared to specialized geographic information systems (GISs) such as ESRI's ArcGIS, which can plot points, polygons, etc. on top of maps and satellite imagery with drag-down menus, these visualizations can be pretty disappointing.This article details some new methods for the visualization of spatial data in R using the layered grammar of graphics implementation of ggplot2 in conjunction with the contextual information of static maps from Google Maps, OpenStreetMap, Stamen Maps or CloudMade Maps (Wickham, 2009(Wickham, , 2010)).The result is an easy to use R package named ggmap.After describing the nuts and bolts of ggmap, we showcase some of its capabilities in a simple case study concerning violent crimes in downtown Houston, Texas and present an overview of a few utility functions.

Plotting spatial data in R
Areal data is data which corresponds to geographical extents with polygonal boundaries.A typical example is the number of residents per zip code.Considering only the boundaries of the areal units, we are used to seeing areal plots in R which resemble those in Figure 1 (left).While these kinds of plots are useful, they are not as informative as we would like in many situations.For instance, when plotting zip codes it is helpful to also see major roads and other landmarks which form the boundaries of areal units.
The situation for point referenced spatial data is often much worse.Since we can't easily contextualize a scatterplot of points without any background information at all, it is common to add points as The R Journal Vol.5/1, June ISSN 2073-4859 an overlay of some areal data-whatever areal data is available.The resulting plot looks like Figure 1 (right).
In most cases the plot is understandable to the researcher who has worked on the problem for some time but is of hardly any use to his audience, who must work to associate the data of interest with their location.Moreover, it leaves out many practical details-are most of the events to the east or west of landmark x? Are they clustered around more well-to-do parts of town, or do they tend to occur in disadvantaged areas?Questions like these can't really be answered using these kinds of graphics because we don't think in terms of small scale areal boundaries (e.g.zip codes or census tracts).
With a little effort better plots can be made, and tools such as maps, maptools, sp, or RgoogleMaps make the process much easier; in fact, RgoogleMaps was the inspiration for ggmap (Becker et al., 2013;Bivand and Lewin-Koh, 2013).
Moreover, there has recently been a deluge of interest in the subject of mapmaking in R-Ian Fellows' excellent interactive GUI-driven DeducerSpatial package based on Bing Maps comes to mind (Fellows et al., 2013).ggmap takes another step in this direction by situating the contextual information of various kinds of static maps in the ggplot2 plotting framework.The result is an easy, consistent way of specifying plots which are readily interpretable by both expert and audience and safeguarded from graphical inconsistencies by the layered grammar of graphics framework.The result is a spatial plot resembling Figure 2. Note that map images and information in this work may appear slightly different due to map provider changes over time.
murder <-subset(crime, offense == "murder") qmplot(lon, lat, data = murder, colour = I('red'), size = I(3), darken = .3)q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q Figure 2: A spatial scatterplot based on Stamen Maps' terrain tile set made with the qmplot function, an experimental amalgamation of the functions presented in this article.

The layered grammar of graphics
One advantage of making the plots with ggplot2 is the layered grammar of graphics on which ggplot2 is based (Wickham, 2010;Wilkinson, 2005).By definition, the layered grammar demands that every plot consist of five components : • a default dataset with aesthetic mappings, • one or more layers, each with a geometric object ("geom"), a statistical transformation ("stat"), and a dataset with aesthetic mappings (possibly defaulted), • a scale for each aesthetic mapping (which can be automatically generated), • a coordinate system, and • a facet specification.
The R Journal Vol.5/1, June ISSN 2073-4859 Since ggplot2 is an implementation of the layered grammar of graphics, every plot made with ggplot2 has each of the above elements.Consequently, ggmap plots also have these elements, but certain elements are fixed to map components : the x aesthetic is fixed to longitude, the y aesthetic is fixed to latitude, and the coordinate system is fixed to the Mercator projection.1 The major theoretical advantage of using the layered grammar in plotting maps is that aesthetic scales are kept consistent.In the typical situation where the map covers the extent of the data, in ggmap the latitude and longitude scales key off the map (by default) and one scale is used for those axes.The same is true of colors, fills, alpha blendings, and other aesthetics which are built on top of the map when other layers are presented-each is allotted one scale which is kept consistent across each layer of the plot.This aspect of the grammar is particularly important for faceted plots in order to make a proper comparison across several plots.Of course, the scales can still be tricked if the user improperly specifies the spatial data, e.g. using more than one projection in the same map, but fixing such errors is beyond any framework.
The practical advantage of using the grammar is even better.Since the graphics are done in ggplot2 the user can draw from the full range of ggplot2's capabilities to layer elegant visual content-geoms, stats, scales, etc.-using the usual ggplot2 coding conventions.This was already seen briefly in Figure 2 where the arguments of qmplot are identical to that of ggplot2's qplot; much more will be seen shortly.

How ggmap works
The basic idea driving ggmap is to take a downloaded map image, plot it as a context layer using ggplot2, and then plot additional content layers of data, statistics, or models on top of the map.In ggmap this process is broken into two pieces -(1) downloading the images and formatting them for plotting, done with get_map, and (2) making the plot, done with ggmap.qmap marries these two functions for quick map plotting (c.f.ggplot2's ggplot), and qmplot attempts to wrap up the entire plotting process into one simple command (c.f.ggplot2's qplot).

The get_map function
In ggmap, downloading a map as an image and formatting the image for plotting is done with the get_map function.More specifically, get_map is a wrapper function for the underlying functions get_googlemap, get_openstreetmap, get_stamenmap, and get_cloudmademap which accepts a wide array of arguments and returns a classed raster object for plotting with ggmap.
As the most important characteristic of any map is location, the most important argument of get_map is the location argument.Ideally, location is a longitude/latitude pair specifying the center of the map and accompanied by a zoom argument, an integer from 3 to 20 specifying how large the spatial extent should be around the center, with 3 being the continent level and 20 being roughly the single building level.location is defaulted to downtown Houston, Texas, and zoom to 10, roughly a city-scale.
While longitude/latitude pairs are ideal for specifying a location, they are somewhat inconvenient on a practical level.For this reason, location also accepts a character string.The string, whether containing an address, zip code, or proper name, is then passed to the geocode function which then determines the appropriate longitude/latitude coordinate for the center.In other words, there is no need to know the exact longitude/latitude coordinates of the center of the map-get_map can determine them from more colloquial ("lazy") specifications so that they can be specified very loosely.For example, since > geocode("the white house") lon lat -77.3676 38.89784 works, "the white house" is a viable location argument.More details on geocode and other utility functions are discussed at the end of this article.
In lieu of a center/zoom specification, some users find a bounding box specification more convenient.To accommodate this form of specification, location also accepts numeric vectors of length four following the left/bottom/right/top convention.This option is not currently available for Google Maps.
While each map source has its own web application programming interface (API), specification of location/zoom in get_map works for each by computing the appropriate parameters (if necessary) and passing them to each of the API specific get_* functions.To ensure that the resulting maps are the same across the various sources for the same location/zoom specification, get_map first grabs the appropriate Google Map, determines its bounding box, and then downloads the other map as needed.In the case of Stamen Maps and CloudMade Maps, this involves a stitching process of combining several tiles (small map images) and then cropping the result to the appropriate bounding box.The result is a single, consistent specification syntax across the four map sources as seen for Google Maps and OpenStreetMap in Figure 3.
baylor <-"baylor university" qmap(baylor, zoom = 14) qmap(baylor, zoom = 14, source = "osm")  with the maptype argument of get_map and must agree with the source argument.Some styles emphasize large roadways, others bodies of water, and still others political boundaries.Some are better for plotting in a black-and-white medium; others are simply nice to look at.This section gives a run down of the various map styles available in ggmap.
Google provides four different familiar types-terrain (default), satellite (e.g. Figure 13), roadmap, and hybrid (e.g. Figure 12).OpenStreetMap, on the other hand, only provides the default style shown in Figure 3.
Style is where Stamen Maps and CloudMade Maps really shine.Stamen Maps has three available tile sets-terrain (e.g.Figures 2 or 13), watercolor, and toner (for the latter two see Figure 5).qmap(baylor, zoom = 14, source = "stamen", maptype = "watercolor") qmap(baylor, zoom = 14, source = "stamen", maptype = "toner") Stamen's terrain tile set is quite similar to Google's, but obviously the watercolor and toner tile sets are substantially different than any of the four Google tile sets.The latter, for example, is ideal for black-and-white plotting.
CloudMade Maps takes the tile styling even further by allowing the user to either (1) select among thousands of user-made sets or (2) create an entirely new style with a simple online editor where the user can specify colors, lines, and so forth for various types of roads, waterways, landmarks, etc., all of which are generated by CloudMade and accessible in ggmap.ggmap, through get_map (or get_cloudmademap) allows for both options.This is a unique feature of CloudMade Maps which really boosts their applicability and expands the possibilities with ggmap.The one minor drawback to using CloudMade Maps is that the user must register with CloudMade to obtain an API key and then pass the API key into get_map with the api_key argument.API keys are free of charge and can be obtained in a matter of minutes.Two low-light CloudMade map styles are seen in Figure 6.Note that map styles are only available to the user that owns them.
Both Stamen Maps and CloudMade Maps are built using OpenStreetMap data.These data are contributed by an open community of online users in much the same way Wikipedia is-both are free, both are user-contributed, and both are easily edited.Moreover, OpenStreetMap has data not only on roadways and bodies of water but also individual buildings, fountains, stop signs and other apparent minutiae.The drawback is that (like Google Maps) not all locations are mapped with the same degree of precision, and imperfections may be observed in small-scale out of the way features.2

The ggmap function
Once get_map has grabbed the map of interest, ggmap is ready to plot it.The result of get_map is a specially classed raster object (a matrix of colors as hexadecimal character strings) -> paris <-get_map(location = "paris") > str(paris) qmap(baylor, zoom = 14, maptype = 53428, api_key = api_key, source = "cloudmade") qmap("houston", zoom = 1 , maptype = 58916, api_key = api_key, source = "cloudmade") The purpose of ggmap is to take the map from the raster object to the screen, and it fulfills this purpose by creating a ggplot object which, when printed, draws the desired map in the graphics device.This is illustrated in Figure 7.
While ggmap requires a ggmap object, it accepts a handful of other arguments as well-extent, base_layer, maprange, legend, padding, and darken.With none of these additional arguments, ggmap effectively returns the following ggplot object ggplot(aes(x = lon, y = lat), data = fourCorners) + geom_blank() + coord_map("mercator") + annotation_raster (ggmap, xmin, xmax, ymin, ymax) where fourCorners is the data frame resulting from applying expand.grid to the longitude and latitude ranges specified in the bb attribute of the ggmap object.Thus, the default base layer of the ggplot2 object created by ggmap is ggplot(aes(x = lon,y = lat),data = fourCorners), and the default x and y aesthetic scales are calculated based on the longitude and latitude ranges of the map.
The extent argument dictates how much of the graphics device is covered by the map.It accepts three possible strings: "normal" shown in Figure 7, "panel" shown in Figures 10 and  12, and "device" shown in every other figure."normal" situates the map with the usual axis padding provided by ggplot2 and, consequently, one can see the panel behind it."panel" eliminates this, setting the limits of the plot panel to be the longitude and latitude extents of the map with scale_[x,y]_continuous(expand = c( , )). "device" takes this to the extreme by eliminating the axes themselves with the new exported theme_nothing.
base_layer is a call which substitutes the default base layer to the user's specification.Thus, in the above code the user can change ggplot(aes(x = lon,y = lat),data = fourCorners) to a different call.This is essential for faceting plots since the referent of ggplot2 functions facet_wrap and facet_grid is the base layer.Since changing the base layer changes the base scales and therefore limits of the plot, it is possible that when the base layer is changed only part of the map is visible.Setting the maprange argument to TRUE (it defaults to FALSE) ensures that the map determines the x and y axis The R Journal Vol.5/1, June ISSN 2073-4859 ggmap(paris, extent = "normal") limits (longitude and latitude) via the bb attribute of the ggmap object itself, and not the base_layer argument.
The legend-related arguments of ggmap are legend and padding, and they are only applicable when extent = "device".The legend argument determines where a legend should be drawn on the map if one should be drawn.Its options are "left", "right" (default), "bottom", "top", "topleft", "bottomleft", "topright", "bottomright" and "none".The first four draw the legend according to ggplot2's normal specifications (without any axes); the next four draw the legend on top of the map itself similar to ArcGIS; and the last eliminates the legend altogether.padding governs how far from the corner the legend should be drawn.
The darken argument, a suggestion by Jean-Olivier Irisson, tints the map image.The default, c( ,"black"), indicates a fully translucent black layer, i.e. no tint at all.Generally, the first argument corresponds to an alpha blending (0 = invisible, 1 = opaque) and the second argument the color of the tint.If only a number is supplied to the darken argument ggmap assumes a black tint.The tint itself is made by adding a geom_rect layer on top of the map.An example is provided by Figure 2, where a black tint was added to the map to enhance the visibility of the points.
Since ggmap returns a ggplot object, the product of ggmap can itself act as a base layer in the ggplot2 framework.This is an incredibly important realization which allows for the full range of ggplot2 capabilities.We now illustrate many of the ways in which this can be done effectively through a case study of violent crime in downtown Houston, Texas.

ggmap in action Data
Crime data were compiled from the Houston Police Department's website over the period of January 2010-August 2010.The data were lightly cleaned and aggregated using plyr (Wickham, 2011) and geocoded using Google Maps (to the center of the block, e.g., 6150 Main St.); the full data set is available in ggmap as the data set crime.

Analysis
The first step we might want to take is to look at where the individual crimes took place.Modulo some simple ggplot2 styling changes (primarily in the fonts and key-styles of the legends via ggplot2's guide function), Figure 8 contains the code to produce the spatial bubble chart shown on the left.
One of the problems with the bubble chart is overplotting and point size-we can't really get a feel for what crimes are taking place and where.One way around this is to bin the points and drop the bins which don't have any samples in them.The result (Figure 8 right) shows us where the crimes are happening at the expense of knowing their frequency.
The binned plot is the first time we really begin to see the power of having the maps in the ggplot2 framework.While it is actually not a very good plot, it illustrates the practical advantage of the ggplot2 framework with the contextual information of the map-the process of splitting the data frame violent_crimes into chunks based on the offense variable, binning the points of each, and aggregating back into one data set to plot is all done entirely behind the scenes by ggplot2.
What about violent crimes in general?If we neglect the type of offense, we can get a good idea of the spatial distribution of violent crimes by using a contour plot.Since the map image itself is based on ggplot2's annotation_raster, which doesn't have a fill aesthetic, we can access the fill aesthetic to make a filled contour plot.This is seen in Figure 9 (left).
The R Journal Vol.5/1, June ISSN 2073-4859 theme_set(theme_bw( 16)) HoustonMap <-qmap("houston", zoom = 14, color = "bw", legend = "topleft") HoustonMap + geom_point(aes(x = lon, y = lat, colour = offense, size = offense), data = violent_crimes) HoustonMap + stat_bin2d( aes(x = lon, y = lat, colour = offense, fill = offense), size = .5,bins = 3 , alpha = 1/2, data = violent_crimes )  The R Journal Vol.5/1, June ISSN 2073-4859 These kinds of overlays can be incredibly effective; however, their ability to communicate information can be hindered by the fact that the map overlay can be visually confused with the map itself.This is particularly common when using colored maps.To get around this problem the inset function can be used to insert map insets containing the overlay on a white background with major and minor axes lines for visual guides made possible by the exported function theme_inset; this is seen in Figure 9 (right).
The image indicates that there are three main hotspots of activity.Each of these three corresponds to locations commonly held by Houstonians to be particularly dangerous locations.From east to west, the hotspots are caused by (1) a county jail which releases its inmates twice daily, who tend to loiter in the area indicated, (2) a commercial bus station in an area of substantial homelessness and destitution, and (3) a prostitution hotspot in a very diverse and pedestrian part of town.
In addition to single plots, the base_layer argument to ggmap or qmap allows for faceted plots (see Figure 10).This is particularly useful for spatiotemporal data with discrete temporal components (day, month, season, year, etc.).
This last plot displays one of the known issues with contour plots in ggplot2-a "clipping" or "tearing" of the contours.Aside from that fact (which will likely be fixed in subsequent ggplot2 versions), we can see that in fact most violent crimes happen on Monday, with a distant second being Friday.Friday's pattern is easily recognizable-a small elevated dot in the downtown bar district and an expanded region to the southwest in the district known as midtown, which has an active nightlife.Monday's pattern is not as easily explainable.
geocode is a vectorized function which accepts character strings and returns a data frame of geographic information.In the default case of output = "simple", only longitudes and latitudes are returned.These are actually Mercator projections of the ubiquitous unprojected 1984 world geodetic system (WGS84), a spheroidal earth model used by Google Maps.When output is set to "more", a larger data frame is returned which provides much more Google Geocoding information on the query: > geocode("baylor university", output = "more") In particular, administrative bodies at various levels are reported.Going further, setting output = "all" returns the entire JavaScript Object Notation (JSON) object given by the Google Geocoding API parsed by rjson (Couture-Beil, 2013).
The Geocoding API has a number of request limitations in place to prevent abuse.An unspecified short-term rate limit is in place (see mapdist below) as well as a 24-hour limit of 2,500 requests.These are monitored to some extent by the hidden global variable .GoogleGeocodeQueryCount and exported function geocodeQueryCheck.geocode uses these to monitor its own progress and will either (1) slow its rate depending on usage or (2) throw an error if the query limit is exceeded.Note that revgeocode shares the same request pool and is monitored by the same variable and function.To learn more about the Google Geocoding, Distance Matrix, and Directions API usage regulations, see the websites listed in the bibliography.

The revgeocode function
In some instances it is useful to convert longitude/latitude coordinates into a physical address.This is made possible (to the extent to which it is possible) with the revgeocode function which also relies on the Google Geocoding API.
> gc <-geocode("baylor university") > (gc <-as.numeric(gc))Thus, in addition to the physical where of a reverse geocode (i.e., the address), revgeocode can report the what at various levels of granularity.Finally, an output = "all" option is available which returns the entire JSON object reported by Google.

The mapdist function
The ability to compute colloquial distances in a spatial setting is another invaluable commodity which typically sends analysts to a GIS.Using the Google Distance Matrix API, ggmap is able to provide distances for Google-determined routes for driving, bicycling, or walking.In addition to the distances, Google reports estimated travel durations as well.The full output is placed in an easy-to-use data frame.For example, The R Journal Vol.5/1, June ISSN 2073-4859 > from <-c("houston", "houston", "dallas") > to <-c("waco, texas", "san antonio", "houston") > mapdist(from, to) from to m km miles seconds minutes hours 1 houston waco, texas 298 4 298. 4 185.1797 119 7 198.45 3.3 75 2 houston san antonio 32 764 32 .764 199.3227 11997 199.95 3.3325 3 dallas houston 387389 387.389 24 .7235 14592 243.2 4. 53333 The default mode of transportation is driving; however, the other modes are also available.The input forms of from and to can be either physical addresses (ideal), lazy ("the white house"), or geographic coordinates (which are reverse geocoded).While the output defaults to the data frame format seen above, setting output = "all" provides the full JSON object from Google.
The Distance Matrix API limits users to 100 requests per query, 100 requests per 10 seconds, and 2500 requests per 24 hours.To the extent to which these can be easily monitored, the exported function distQueryCheck helps the user keep track of their remaining balance of queries.If the user exceeds the limitations, mapdist either (1) pauses until the short-term request limit has lapsed or (2) errors if no queries are remaining.Thus, it is almost identical to the mechanism in place for geocoding.If the user believes this to be incorrect, an override is available with the mapdist specification override_limit = TRUE.
The data frame output of mapdist is very convenient for use with ggplot2.An example is provided by Figure 11, where travel times from one location ("My Office") to several nearby locations are (1) determined using mapdist, (2) binned into categories using cut, and then (3) plotted using a combination of qmap, geom_text, and geom_rect with the fill aesthetic set to the category of travel time.The full code is in the examples section of the documentation of ggmap.

The route function
The route function provides the map distances for the sequence of "legs" which constitute a route between two locations.Each leg has a beginning and ending longitude/latitude coordinate along with a distance and duration in the same units as reported by mapdist.A nice illustration of plotting routes with geom_leg can be seen in Figure 12 where three routes are plotted between the same two locations.These can be obtained using the alternatives = TRUE specification in route.alternatives requests more than one route from the origin to the destination; the returned value is again a data frame with an additional variable which serves as a route identifier (A, B, C, etc.).Like map distances, there are restrictions on the limit of routes which can be requested in a given period of time as well.The number of queries left is monitored by the .GoogleRouteQueryCount variable with the routeQueryCheck function.

Plotting shape files
As a final example which is perhaps too common to ignore, plotting shape files with ggmap is a breeze and can be done in several ways.The easiest way is to convert the shape file to a data frame with fortify (ggplot2) and then add a point/path/polygon layer to the map, depending on what the contents of the shape file are (note that fortify does not yet have methods for all shape files).Additional layers can be added by simply layering on more geom layers.Figure 13   The R Journal Vol.5/1, June ISSN 2073-4859

Figure 1 :
Figure 1: A typical R areal plot -zip codes in the Greater Houston area (left), and a typical R spatial scatterplot -murders in Houston from January 2010 to August 2010 (right).

Figure 3 :
Figure 3: get_map provides the same spatial extent for Google Maps (top) and OpenStreetMaps (bottom) with a single simple syntax, even though their APIs are quite different.

Figure 6 :
Figure 6: Two out of thousands of user made CloudMade Maps styles.The left is comparable to Figures 3 and 5, and the right contains the bodies of water in Figure 4.

Figure 8 :
Figure 8: Violent crime bubble chart of downtown Houston (left) and the same binned (right).

Figure 9 :
Figure 9: Filled contour plot of violent crimes (left), and the same with an inset (right).

Figure 10 :
Figure 10: Faceted filled contour plot by day.

Figure 11 :
Figure 11: Distances by time provided by mapdist.

Figure 12 :
Figure 12: Three routes returned by route plotted with geom_leg.
shows a basic example of plotting the U.S. Census 2000 census tracts along with complete code (U.S. Census Bureau, Geography Division, Cartographic Products Management Branch, 2001).

#Figure 13 :
Figure 13: Plotting shape files -Census tracts in Texas from the 2000 U.S. Census.
Since we are only interested in violent crimes which take place downtown, we restrict the data set to those qualifiers.To determine a bounding box, we first use gglocator, a ggplot2 analogue of base's locator function exported from ggmap.gglocator works not only for ggmap plots, but ggplot2 graphics in general.
Like geocode, more output can be provided as well - It relies on the hidden global variable .GoogleDistQueryCount - The collection of legs in sequence The R Journal Vol.5/1, June ISSN 2073-4859 constitutes a single route (path) most easily plotted with geom_leg, a new exported ggplot2 geom which is simply geom_segment with rounded ends. 3